RTL-SDR Blog RTL SDR Receiver V3 RTL2832U 0.1MHz-1.7GHz TCXO SMA Software Defined Radio Receiver wit

SDR Receiver RTL2832U + R820T2 Chip 1PPM TCXO ADS-B 0.1MHz-1.7GHz Full Band Software Defined Radio Receiver\nDescription:\nThe signal received by the antenna is converted into data by this receiver and sent to the computer, Android phone, and other devices via the USB interface. The software on the computer, Android phone, and other devices processes the demodulated signal, displays the frequency spectrum, and arbitrarily sets the reception. Bandwidth, signal recording, saving, playback, and other functions.\nReceives electromagnetic waves in the range of 100KHz-1.7GHz, supports AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation. Can be used to listen to shortwave single-band communication, FM radio, intercom calls, aviation band, meteor monitoring ADS-B decoding, AIS signal reception, etc.\nFeature:\nThis receiver has a built-in 1 ppm temperature compensation crystal (TCXO). Makes the frequency more stable and accurate.\nThe almost zero temperature drift (2 ppm initial deviation, 1 ppm temperature drift) increases the internal chip heat dissipation, making the work more stable.\nUses the latest RTL2832U + R820T2 solution (the R820T2 tuner has slightly better sensitivity than the R820T, lower background noise, and higher signal-to-noise ratio. Can work more stably at frequencies around 1.5 GHz.)\nThe Q channel of the RTL2832U is used to increase the direct mining reception of the frequency 100KHz-24MHz. Achieved 100KHz-1.7GHz full-segment reception.\nSupport for Windows XP/7/8/0, for MAC, for Android and other systems.\nSpecification:\nType: with Antenna\nProduct size: 71 x 43 x 19mm/2.80 x 1.69 x 0.75 inches\nProduct weight: 34g\nColor: silver\nmaterial: metal\nPackage contents:\n1 x RTL SDR Receiver\n1 x Antenna\nOnly the above package content, other products are not included.\nNote: Light shooting and different displays may cause the color of the item in the picture